WATCH INSTRUCTIONS
Need help setting up your watch? Follow the instructions outlined below.
-
CHRONO S
-
KAIROS
-
BELLWETHER
-
ROGUE
-
ALTITUDE
-
VESSEL
-
APEX
-
KLEIO
-
RHEA
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
REALIGN THE 60 SECOND TIMER
Pull crown to 3rd position. Press and hold the A button until second hand is at desired position. Push crown back to 1st position.
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st Position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
DAY & NIGHT DIAL
This is a 24 hour clock. 'Day' represents hours from 6AM to 6PM and 'Night' from 6PM to 6AM. The Day & Night dial is synced with the watch time.
DUAL TIME DIAL
This is a 24 hour clock that displays a second time zone. To adjust the 24 hour hand, press the A button to move the hand forward in 15 minute increments or the B button to move the hand backward in 15 minute increments.
SET THE TIME
Unscrew the B crown counter-clockwise to release it. Pull to 3rd position. Rotate clockwise until correct time is shown. To start the time, push back to 1st position. While pushing in, screw the B crown clockwise to seal it.
SET THE DATE
Unscrew the B crown counter-clockwise to release it. Pull to 2nd position. Rotate counter-clockwise until correct date is shown. To set the date, push back to 1st position. While pushing in, screw the B crown clockwise to seal it.
60 MINUTE TIMER
The interior bezel rotates as a manual timer. Rotate the bezel by turning the A crown clockwise. Once the Vincero logo on the bezel is in line with the minute hand, you can track time elapsed.
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
MENS COLLECTIONS
THE CHRONO S
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
REALIGN THE 60 SECOND TIMER
Pull crown to 3rd position. Press and hold the A button until second hand is at desired position. Push crown back to 1st position.
THE KAIROS
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st Position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
THE BELLWETHER
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
THE ROGUE
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
THE ALTITUDE
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
DAY & NIGHT DIAL
This is a 24 hour clock. 'Day' represents hours from 6AM to 6PM and 'Night' from 6PM to 6AM. The Day & Night dial is synced with the watch time.
DUAL TIME DIAL
This is a 24 hour clock that displays a second time zone. To adjust the 24 hour hand, press the A button to move the hand forward in 15 minute increments or the B button to move the hand backward in 15 minute increments.
THE VESSEL
SET THE TIME
Unscrew the B crown counter-clockwise to release it. Pull to 3rd position. Rotate clockwise until correct time is shown. To start the time, push back to 1st position. While pushing in, screw the B crown clockwise to seal it.
SET THE DATE
Unscrew the B crown counter-clockwise to release it. Pull to 2nd position. Rotate counter-clockwise until correct date is shown. To set the date, push back to 1st position. While pushing in, screw the B crown clockwise to seal it.
60 MINUTE TIMER
The interior bezel rotates as a manual timer. Rotate the bezel by turning the A crown clockwise. Once the Vincero logo on the bezel is in line with the minute hand, you can track time elapsed.
THE APEX
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
THE ICON AUTOMATIC
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
THE OUTRIDER
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
ROTATING BEZEL (60 MINUTE TIMER)
The exterior bezel works as a manual timer. Rotate the bezel by manually turning it counterclockwise. Once the triangle on the bezel is in line with the minute hand, you can track time elapsed.
THE MARBLE AUTOMATIC
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st Position.
THE RESERVE AUTOMATIC
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st Position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
SET THE DAY OF WEEK
Pull crown to 2nd position. Rotate counter-clockwise until correct day is shown and push back to 1st position.
SET THE MONTH
Push the button on the case of the watch (D) until the month is correct. TIP: Use a small item like a pen or pencil to push the button in.
The Argo Automatic
SET THE TIME
Unscrew the crown counter-clockwise to release it. Pull to the 3rd position. Rotate until the correct time is shown. To start the time, push back to the 1st position. While pushing in, screw in the crown clockwise to seal it.
SET THE DATE
Unscrew the crown counter-clockwise to release it. Pull to the 2nd position. Rotate clockwise until the correct date is shown.
SECURING THE CLASP
In order to ensure your Argo is secure on your wrist, place your index finger between your wrist and the clasp before pressing firmly with your thumb. Once the clasp is secured, you will notice an audible click. Note that the clasp will only fully engage with a firm press.
WOMENS COLLECTIONS
THE EROS
SET THE TIME
Pull crown to 2nd position. Rotate clockwise until correct time is shown and push back to 1st position.
THE KLEIO
SET THE TIME
Pull crown to 2nd position. Rotate clockwise until correct time is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
THE AVA
SET THE TIME
Pull crown to 2nd position. Rotate clockwise until correct time is shown and push back to 1st position.
THE RHEA
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
THE REIGN
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
REALIGN THE 60 SECOND TIMER
Pull crown to 3rd position. Press and hold the A button until second hand is at desired position. Push crown back to 1st position.
THE VIENNA
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
THE HARPER
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
STRAP INSTRUCTIONS
-
MESH
-
LEATHER
-
STEEL
-
ROGUE
REMOVE STRAP
Press the springbar lever in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
Align the left side of the springbar in the notch in the watch case. Press in the springbar lever to align the right side of the springbar and adjust the position until the right side of the strap locks into place.
RESIZE THE MESH BAND
1. Lift up the clasp with enclosed tool
2. Slide clasp to desired slot to adjust the length
3. Push clasp down with the tool to secure the clasp
REMOVE STRAP
Press the springbar lever in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
Align the left side of the springbar in the notch in the watch case. Press in the springbar lever to align the right side of the springbar and adjust the position until the right side of the strap locks into place.
REMOVE STRAP
Press both springbar levers in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
While pressing in both levers, align one side of the springbar in the notch in the watch case. Then align the other side of the springbar and adjust the position until the strap locks into place.
RESIZE THE STRAP
In order to adjust the length of your steel strap, links will need to be either removed or added to find the perfect fit. We strongly recommend that you bring your Vincero to a watch repair shop or a jewelry store at your local mall. They have the correct tools necessary to size the watch and should be able to make the adjustment for little to no charge.
REMOVE STRAP
Press both springbar levers in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
While pressing in both levers, align one side of the springbar in the notch in the watch case. Then align the other side of the springbar and adjust the position until the strap locks into place.
STRAP INSTRUCTIONS
-
MESH
-
LEATHER
-
STEEL
-
ROGUE
REMOVE STRAP
Press the springbar lever in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
Align the left side of the springbar in the notch in the watch case. Press in the springbar lever to align the right side of the springbar and adjust the position until the right side of the strap locks into place.
RESIZE THE MESH BAND
1. Lift up the clasp with enclosed tool
2. Slide clasp to desired slot to adjust the length
3. Push clasp down with the tool to secure the clasp
REMOVE STRAP
Press the springbar lever in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
Align the left side of the springbar in the notch in the watch case. Press in the springbar lever to align the right side of the springbar and adjust the position until the right side of the strap locks into place.
REMOVE STRAP
Press both springbar levers in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
While pressing in both levers, align one side of the springbar in the notch in the watch case. Then align the other side of the springbar and adjust the position until the strap locks into place.
REMOVE STRAP
Press both springbar levers in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
While pressing in both levers, align one side of the springbar in the notch in the watch case. Then align the other side of the springbar and adjust the position until the strap locks into place.
WATER RESISTANCE
Our watches range from 3 ATM to 20 ATM.
Please use this chart to determine what each rating means in terms of water resistance.
MENS COLLECTIONS
THE CHRONO S
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
REALIGN THE 60 SECOND TIMER
Pull crown to 3rd position. Press and hold the A button until second hand is at desired position. Push crown back to 1st position.
THE KAIROS
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st Position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
THE BELLWETHER
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
THE ROGUE
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
THE ALTITUDE
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
DAY & NIGHT DIAL
This is a 24 hour clock. 'Day' represents hours from 6AM to 6PM and 'Night' from 6PM to 6AM. The Day & Night dial is synced with the watch time.
DUAL TIME DIAL
This is a 24 hour clock that displays a second time zone. To adjust the 24 hour hand, press the A button to move the hand forward in 15 minute increments or the B button to move the hand backward in 15 minute increments.
THE VESSEL
SET THE TIME
Unscrew the B crown counter-clockwise to release it. Pull to 3rd position. Rotate clockwise until correct time is shown. To start the time, push back to 1st position. While pushing in, screw the B crown clockwise to seal it.
SET THE DATE
Unscrew the B crown counter-clockwise to release it. Pull to 2nd position. Rotate counter-clockwise until correct date is shown. To set the date, push back to 1st position. While pushing in, screw the B crown clockwise to seal it.
60 MINUTE TIMER
The interior bezel rotates as a manual timer. Rotate the bezel by turning the A crown clockwise. Once the Vincero logo on the bezel is in line with the minute hand, you can track time elapsed.
THE APEX
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
THE ICON AUTOmatic
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
THE OUTRIDER
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
ROTATING BEZEL (60 MINUTE TIMER)
The exterior bezel works as a manual timer. Rotate the bezel by manually turning it counterclockwise. Once the triangle on the bezel is in line with the minute hand, you can track time elapsed.
THE MARBLE AUTOMATIC
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st Position.
THE RESERVE AUTOMATIC
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st Position.
SET THE DATE
Pull crown to 2nd position. Rotate clockwise until correct date is shown and push back to 1st position.
SET THE DAY OF WEEK
Pull crown to 2nd position. Rotate counter-clockwise until correct day is shown and push back to 1st position.
SET THE MONTH
Push the button on the case of the watch (D) until the month is correct. TIP: Use a small item like a pen or pencil to push the button in.
THE ARGO AUTOMATIC
SET THE TIME
Unscrew the crown counter-clockwise to release it. Pull to the 3rd position. Rotate until the correct time is shown. To start the time, push back to the 1st position. While pushing in, screw in the crown clockwise to seal it.
SET THE DATE
Unscrew the crown counter-clockwise to release it. Pull to the 2nd position. Rotate clockwise until the correct date is shown.
SECURING THE CLASP
In order to ensure your Argo is secure on your wrist, place your index finger between your wrist and the clasp before pressing firmly with your thumb. Once the clasp is secured, you will notice an audible click. Note that the clasp will only fully engage with a firm press.
WOMENS COLLECTIONS
THE EROS
SET THE TIME
Pull crown to 2nd position. Rotate clockwise until correct time is shown and push back to 1st position.
THE KLEIO
SET THE TIME
Pull crown to 2nd position. Rotate clockwise until correct time is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
THE AVA
SET THE TIME
Pull crown to 2nd position. Rotate clockwise until correct time is shown and push back to 1st position.
THE RHEA
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
THE REIGN
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
STOPWATCH
Press the A button to start & stop the timers. Press the B button to reset the timers.
REALIGN THE 60 SECOND TIMER
Pull crown to 3rd position. Press and hold the A button until second hand is at desired position. Push crown back to 1st position.
THE VIENNA
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
THE HARPER
SET THE TIME
Pull crown to 3rd position. Rotate clockwise until correct time is shown and push back to 1st position.
SET THE DATE
Pull crown to 2nd position. Rotate counter-clockwise until correct date is shown and push back to 1st position.
STRAP INSTRUCTIONS
-
MESH
-
LEATHER
-
STEEL
-
ROGUE
REMOVE STRAP
Press the springbar lever in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
Align the left side of the springbar in the notch in the watch case. Press in the springbar lever to align the right side of the springbar and adjust the position until the right side of the strap locks into place.
RESIZE THE MESH BAND
1. Lift up the clasp with enclosed tool
2. Slide clasp to desired slot to adjust the length
3. Push clasp down with the tool to secure the clasp
REMOVE STRAP
Press the springbar lever in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
Align the left side of the springbar in the notch in the watch case. Press in the springbar lever to align the right side of the springbar and adjust the position until the right side of the strap locks into place.
REMOVE STRAP
Press both springbar levers in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
While pressing in both levers, align one side of the springbar in the notch in the watch case. Then align the other side of the springbar and adjust the position until the strap locks into place.
REMOVE STRAP
Press both springbar levers in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
While pressing in both levers, align one side of the springbar in the notch in the watch case. Then align the other side of the springbar and adjust the position until the strap locks into place.
STRAP INSTRUCTIONS
-
MESH
-
LEATHER
-
STEEL
-
ROGUE
REMOVE STRAP
Press the springbar lever in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
Align the left side of the springbar in the notch in the watch case. Press the springbar lever in to align the right side of the springbar and adjust the position until the right side of the strap locks into place.
RESIZE THE MESH BAND
1. Lift up the clasp with enclosed tool
2. Slide clasp to desired slot to adjust the length
3. Push clasp down with the tool to secure the clasp
REMOVE STRAP
Press the springbar lever in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
Align the left side of the springbar in the notch in the watch case. Press in the springbar lever to align the right side of the springbar and adjust the position until the right side of the strap locks into place.
REMOVE STRAP
Press both springbar levers in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
While pressing in both levers, align one side of the springbar in the notch in the watch case. Then align the other side of the springbar and adjust the position until the strap locks into place.
RESIZE THE STRAP
In order to adjust the length of your steel strap, links will need to be either removed or added to find the perfect fit. We strongly recommend that you bring your Vincero to a watch repair shop or a jewelry store at your local mall. They have the correct tools necessary to size the watch and should be able to make the adjustment for little to no charge.
REMOVE STRAP
Press both springbar levers in and gently lift up the strap to remove it from the watch case.
ATTACH STRAP
While pressing in both levers, align one side of the springbar in the notch in the watch case. Then align the other side of the springbar and adjust the position until the strap locks into place.
WATER RESISTANCE
Our watches range from 3 ATM to 20 ATM.
Please use this chart to determine what each rating means in terms of water resistance.
NEED HELP?
If you have any other questions, comments, or concerns, we’re always happy to help. Email us and we will get you taken care of.
support@vincerocollective.com
If you have any other questions, comments, or concerns, we’re always happy to help. Email us and we will get you taken care of.
support@vincerocollective.com
